Baso Y75 Series Manuel d'utilisateur télécharger pdf

Installation Instructions Y75

Issue Date August 22, 2008

Part No. BASO-INS-Y75, Rev. B www.baso.com

Dimension “B”

Locating

Dimension

Dimension “A”

Electrode

Protrusion

Length

Figure 1: Y75 Sensing Probe

The Y75 sensing probe may be used to replace broken or damaged sensing

probes in electronic ignition control systems.

Table 1: Specifications

Product

Y75 Replacement Sensing Probes

Material

Rod: Kanthal D or Hoskin 815

Ceramic: Steatite

Maximum

Rod:

1,800°F (982°C)

Temperature

Ceramic:

1,000°F (538°C)

Agency Listings

CSA Certificate Number 22951-165071

Specification Standards

ANSI Z21.20, CAN1-6.4

Performance specifications are nominal and conform to acceptable industry standards. All agency

certification of BASO products is performed under dry and controlled indoor environmental conditions.

Use of BASO products beyond these conditions is not recommended and may void the warranty.

Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh

environments. The original equipment manufacturer or end user is responsible for the correct

application of BASO products. Consult BASO Gas Products LLC for questionable applications. BASO

Gas Products LLC shall not be liable for damages or product malfunctions resulting from

misapplication or misuse of its products.

Refer to the Y75 Series Sensing Probes Product Bulletin (BASO-PB-Y75) for necessary information on

operating and performance specifications of this product.

CAUTION: Turn off the gas to the appliance at the upstream

manual shutoff valve before installing the Y75 sensing

probe.

WARNING: Shock Hazard. To prevent electrical shock or possible

damage to the equipment, disconnect the power

supply.

Series Y75 Sensing Probes

for Electronic Ignition Systems

Application

Installation

1 2

Résumé du contenu

Page 1 - Series Y75 Sensing Probes

Page 2 - PO Box 170

2 Series Y75 Replacement Sensing Probe for Electronic Ignition Systems Installation Instruction Perform the following procedure to install the Y75

Commentaires sur ces manuels

Pas de commentaire

Baso Y75 Series Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Baso Y75 Series. BASO Y75 Series User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Baso Y75 Series